Metal Round Candle Mold

Rated 5.00 out of 5 based on 1 customer rating
(1 customer review)


Comes in two sizes:

  1.  3 inch (Diameter) x 6.5 inch (Height)
  2.  3 inch (Diameter) x 9 inch (Height)


Durable and seamless aluminium candle mold suitable for pillar candle making process. These come with a wick hole at the bottom of the mold.

Comes in two sizes:

  • 3 inch (Diameter) x 6.5 inch (Height)
  • 3 inch (Diameter) x 9 inch (Height)


  • Clean mold with isopropyl alcohol or hot water. Wipe dry.
  • Get your wick ready by gluing/tacking/knotting it to the bottom of the wick hole.
  • Clip the wick upright with plastic clip at the top of the mold.
    In another pot, melt wax under low power using a microwave or in a double boiler. Be careful not to overheat wax.
  • Stir occasionally (overheated wax will discolor and/or burn your wax).
  • Remove wax from fire and allow wax to cool down for 5 minutes.
  • Add color & fragrance or essential oils. (Oils will evaporate if the wax is too hot)
  • Stir and mix gently.
  • Optional to spray a release agent into the mold before pouring. This will ease demolding of the candle.
  • Gently pour the wax into metal mold. Make sure the wick is upright and taunt at all times.
  • Allow wax to set at room temperature and let it cure for 1-2 days.
  • To remove the candle from the mold, squeeze the mold in all direction, gently tap the mold and slowly let it slide.
  • If candle refused to come out, place the mold in the freezer for 2 minutes and try again.
  • We suggest to experiment with a small batch to get the right scent and wick for your candle. Add variations by doing different coloured layers or combining different waxes together.

Wick recommendations:

Wedo wick  – cotton Type FD availble at Craftiviti.

More craft materials available online and at our craft shop at Craftiviti Sdn. Bhd. (Petaling Jaya, Malaysia).


Tahan lasak dan acuan lilin aluminium bulat tidak berkelim sesuai untuk membuat lilin pillar. Acuan ini lengkap dengan lubang sumbu dibawahnya.

Produk ini mempunyai dua saiz:

  • 3 inci (diameter) x 6 inci (tinggi)
  • 3 inci (diameter) x 9 inci (tinggi)


  • Bersihkan acuan menggunakan isopropil alkohol atau air panas. Lap hingga kering.
  • Sediakan sumbu dengan melekat atau mengikat pada lubang sumbu dibawah acuan tersebut.
  • Klip sumbu tegak menggunakan klip plastic di atas acuan.
  • Didalam bekas yang lain, cairkan lilin menggunakan ketuhar pada suhu yang rendah atau menggunakan pemanas bertingkat (double boiler).
  • Jangan biarkan lilin menjadi terlalu panas. Sentiasa kacau (lilin yang terlalu panas yang hilang warnanya/terbakar)
  • Alihkan lilin dari api dan biarkan lilin sejuk selama 5 minit.
  • Tambahkan pewarna dan wangian atau minyak pati (minyak akan tersejat sekiranya lilin terlalu panas).
  • Kacau dengan lembut.
  • Semburan agen pelepas acuan adalah pilihan sebelum dituangkan. Hal ini akan memudahkan pengacuan lilin.
  • Tuangkan lilin ke dalam acuan logam. Pastikan sumbu tegak dan tegang sepanjang masa.
  • Biarkan lilin pada suhu bilik dab biarkan ia terawet 1-2 hari.
  • Bagi mengalihkan lilin dari acuan, picit/tekan acuan dari semua arah/sudut dan perlahan-lahan tepuk acuan lalu biarkan ia menggelongsor. Jika lilin tidak keluar, letakkan acuan di dalam peti sejuk beku selama 2 minit dan cuba sekali lagi.
  • Kami menyarankan agar eksperimen ini dicuba dengan kadar yang sedikit bagi mendapatkan wangian dan sumbu yang tepat untuk lilin anda. Pelbagaikan variasi dengan menggunakan warna atau lilin yang berlainan.

Saranan sumbu:

Sumbu Wedo- kapas jenis FD 3×11 NST2. Boleh didapati di Craftiviti.

Pelbagai barangan kraf boleh didapati menerusi talian dan kedai kami di Craftiviti Sdn. Bhd. (Petaling Jaya, Malaysia).

Additional information

Additional information


CF10313 – 3×6.5, CF10314 – 3×9

Reviews (1)

1 review for Metal Round Candle Mold

  1. Rated 5 out of 5

    Anonymous (verified owner)

Add a review
Shipping & Tracking
Shipping of Craftiviti craft materials will go through DHL to West Malaysia (Peninsular) ). GDex Express to East Malaysia (Sabah Sarawak). Shipping rates are:

GDex Express

West Malaysia (Peninsular) - RM10.00 (for the 1st 1kg), additional RM2.50 (for the next 1kg)

East Malaysia* (Sabah/Sarawak) - RM14.00 (for the 1st 1kg), additional RM12.00 (for the next 1kg)

Singapore - RM48.00 (for the 1st 1kg), additional RM18.00 (for the next 1kg). Additional 7% Singapore customs tax will be charged separately.
*Due to Singapore customs restriction, kindly send us an email to order and we will guide you from there.

East Malaysia Orders

Liquid items to Sabah and Sarawak may experience slight leakage due to air pressure. Necessary packing procedures will be taken to minimize this occurrence.

Once payment has been received, your order will be processed within 3 working days and will arrive at your door step within 7 working days.

Your tracking number will be provided to you once collection has been made at our end.

Urgent Order

While we would love to accommodate all urgent orders and get your craft materials to you as soon as possible, it would be safer for you to allow a window frame of 3 to 7 days for delivery in case of any delays during delivery.

Tracking Details

Once GDex has collected the parcel, we will send the tracking details to your email address and to the order page at My Account.

You can view the tracking number by going to Orders at My Account or at the link below.